CAMWorks 2023 SP5
CAMWorks 2023 SP5 | 1.6 Gb
Languages Supported: 中文 Simplified, 中文 Traditional, Français, Deutsch, Italiano,
日本語, Polski, Português-Brazilian, Русский, Español, Türkçe, 한국어, Čeština
Languages Supported: 中文 Simplified, 中文 Traditional, Français, Deutsch, Italiano,
日本語, Polski, Português-Brazilian, Русский, Español, Türkçe, 한국어, Čeština
The HCLSoftware development team is pleased to announce the availability of HCL CAMWorks 2023 SP5 is an intuitive, feature-based CAM software that helps to increase productivity using best-in-class technologies and adaptable automation tools to maximize CNC machining efficiency.
1. CW-124214 CSR-24358 API
When executing the API macro "GetEnumRecords" for any Rough Mill or Contour Mill toolpath, an error message gets displayed and the macro stops working. However, it works correctly for Drilling toolpaths.
2. CW-124090 CSR-24304 Simulation
During Simulation mode, the Tool display for Dovetail tool is incorrect. However, if the ‘Center cutting’ checkbox under Tool tab of Operation Parameters dialog box is checked, then the tool gets displayed correctly.
3. CW-121896 CSR-23447 Feed Speed
For the Entry drill operation that are assigned tools with diameter in the range of 1mm to 7mm, the correct surface speed (SFM/SMM) is not retrieved from the Feed Speed Library.
4. CW-119885 CSR-22686 System
For the specific Mill part, CAMWorks gets repeatedly hanged when previewing operations containing WIP Rest Machining.
5. CW-119117 CSR-22313 Toolpath
For the specific Assembly, the ‘Retract between features’ option does not work correctly for the Single Point operation. This is observed when ‘Retract between features’ is set to ‘Use skim plane’ with a distance value assigned. The toolpath does not change when this distance value changes.
6. CW-110977 CSR-17803 Rebuild For the specific imported part, when user selected an *.igs file to replace the imported part, the CAMWorks Rebuild prompt pops-up. If the rebuild command is executed, then an error message stating “The CAMWorks features are no longer correct because there are two bodies in part.” gets displayed and the CAMWorks rebuild fails.
When executing the API macro "GetEnumRecords" for any Rough Mill or Contour Mill toolpath, an error message gets displayed and the macro stops working. However, it works correctly for Drilling toolpaths.
2. CW-124090 CSR-24304 Simulation
During Simulation mode, the Tool display for Dovetail tool is incorrect. However, if the ‘Center cutting’ checkbox under Tool tab of Operation Parameters dialog box is checked, then the tool gets displayed correctly.
3. CW-121896 CSR-23447 Feed Speed
For the Entry drill operation that are assigned tools with diameter in the range of 1mm to 7mm, the correct surface speed (SFM/SMM) is not retrieved from the Feed Speed Library.
4. CW-119885 CSR-22686 System
For the specific Mill part, CAMWorks gets repeatedly hanged when previewing operations containing WIP Rest Machining.
5. CW-119117 CSR-22313 Toolpath
For the specific Assembly, the ‘Retract between features’ option does not work correctly for the Single Point operation. This is observed when ‘Retract between features’ is set to ‘Use skim plane’ with a distance value assigned. The toolpath does not change when this distance value changes.
6. CW-110977 CSR-17803 Rebuild For the specific imported part, when user selected an *.igs file to replace the imported part, the CAMWorks Rebuild prompt pops-up. If the rebuild command is executed, then an error message stating “The CAMWorks features are no longer correct because there are two bodies in part.” gets displayed and the CAMWorks rebuild fails.
CAMWorks 2023 SP5
CAMWorks for SOLIDWORKS was the first fully integrated computer-aided manufacturing (CAM) solution designed exclusively to operate in SOLIDWORKS and the first to offer knowledge-based, feature recognition, and associative machining capabilities within SOLIDWORKS. CAMWorks uses the same SOLIDWORKS geometry to generate toolpaths to ensure the part you machine is the same part you’ve modeled. Toolpath simulation allows users to compare “as designed” parts to “as machined” parts. The part model-to-toolpath associativity in CAMWorks increases machining productivity and lowers manufacturing costs by eliminating time-consuming CAM system rework due to design updates. CAMWorks eliminates the drudgery of CNC programming with Intelligent Machining through automation. Pioneered by Geometric Technologies, this suite of tools automates the generation of toolpaths based on a knowledge-based database. It eliminates hours of complex programming through Automatic Feature Recognition (AFR) that automatically defines prismatic machinable features, while the TechDBTM (Technology Database) defines machining operations to automatically generate accurate toolpaths at the click of a button. CAMWorks machining modules include: 2½ Axis Mill, 3 Axis Mill, Turning, Mill-Turn with 5 Axis Simultaneous Machining Support, 4/5 Axis Simultaneous Machining, and Wire EDM.
CAMWorks 2023 combines the benefits of a fully integrated CAD/CAM system with advanced programming technologies such as feature-based programming, automatic feature recognition, knowledge-based machining and TechDB for storing and reusing best practices.
What's new in CAMWorks 2023 - An overview
HCLSoftware is a division of HCL Technologies (HCL) that operates its primary software business. We develop, market, sell, and support over 30 product families in the areas of Customer Experience, Digital Solutions, Secure DevOps, Security & Automation.
Owner: HCL Technologies (HCL)
Product Name: CAMWorks
Version: 2023 SP5 build 2023/1208 (08-Dec-2023)
Supported Architectures: x64
Website Home Page : www.camworks.com
Languages Supported: multilanguage
System Requirements: Windows *
Software Prerequisites: pre-installed SolidWorks 2022-2024
Size: 1.6 Gb
CAMWorks 2023 SP5
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![CAMWorks 2023 SP5]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
CAMWorks 2023 SP5
