DNV GeniE 8.8-08
DNV GeniE 8.8-08 | 491.8 mb
DNV, the world-leading provider of software for managing risk and improving asset performance in the energy, process and maritime industries, has released GeniE 8.8-08 is a tool for concept (high level geometry) modelling of beams, flat plates and stiffened shells.
Supported operating systems:
- Windows 10 64bit
- Windows 11 64bit
The following versions, or later, of Sesam applications should be used with this version of GeniE:
- Sestra 10.17-02
- Splice 8.0-01 (but it is required to use the upcoming Splice 8.1 for import of springs along piles)
- Submod 3.3-01
- Wajac 7.10-00
- Xtract 6.1-01
- Usfos 9.0-00
- Framework 4.4-00
- Stofat 4.1-02
- Sesam Converters 2.3-04
- Sesam Connector 1.0-03
- Sesam Core 2.0.0
- Nauticus Hull x86 - January 2018 - 18.15.97.1985
- Nauticus Hull 64bit – September 2023 - 20.29.2310.1204
- License Manager V11.19-02 (Flexnet V11.19 for license manager and dongle driver)
Highlighted features
Support for multiple soil conditions The user can now assign a specific location for each pile. Each pile in a model can therefore have different soil conditions that the other piles in the same model. The mesh of each pile is adjusted according to the soil sub-layers of the assigned location.
Soil linearisation along the pile When running a pile-soil analysis using Splice 8.1 or later, equivalent linear soil springs at each soil sub-layer are calculated and exported into a file. This file with the springs can be imported into GeniE and the piles can be replaced with beam elements to create a linearised foundation.
Earthquake analysis The user can now run an earthquake analysis from GeniE and execute code checks in GeniE based on combinations with earthquake analysis results. The license FRAMEWORK__EQRK is required in order to model earthquake data and execute the earthquake analysis in GeniE 8.8.
New features
- Feature 116483: Support automatic pile-soil linearisation along pile
- Feature 132946: Support earthquake analysis and code check in Genie
- Feature 248354: Support for multiple soil conditions
- Feature 248424: Export of compartments from NH to GeniE - Loads
- Feature 500883: Mesh options to replace piles with beam elements or to ignore piles in the mesh
- Technical Feature 153032: Make the new Domain Model Importer as default on SACS and FEM import
Bug fixes
- Bug 336670: Modelling grid not available in Create a set of stiffeners
- Bug 455988: Month in release notes is spelled in Norwegian
- Bug 460292: Point-Point Connections could not be listed in regular set after import SACS file
- Bug 460680: “No suitable constructors” when point mass included in get ConnectedConcepts
- Bug 461109: Unknown identifier when importing SACS file with Domain Model Import
- Bug 464952: Crash for splitting curve at point when selecting knot vector point
- Bug 465931: Some words appear in different color in the documentation
- Bug 467380: Crash in undo creating modelling grid through snap grid dialog
- Bug 469196: The color for fatigue hotspot could only change once and could not restore defaults
- Bug 472021: On-line Help System Error for misc. analysis types dialogs help shortcuts
- Bug 474833: GeniE model cannot export a set as xml file
- Bug 476018: GeniE Crash when right click on folder of a Load case on browser tree
- Bug 480126: Incomplete display for options in create slice dialog
- Bug 481993: Copy Run not clone selected code check run when multiple runs exist
- Bug 482327: Color code not shown and graphic got frozen after set to default palette
- Bug 482802: Longitudinal stiffener not able to be created on hullform
- Bug 482958: ACIS Error in unconnected move rotation
- Bug 483885: Heavy opening time for Jacket model
- Bug 484601: Can’t open model
- Bug 485174: GeniE doesn’t display the beam end properties correctly
- Bug 485753: Bad shaped elements created by Patch Surf mesher
- Bug 486804: Activate “Growth rate” option does not take effect without changing growth rate value
- Bug 486989: Not able to mesh in model in Sesam Manager
- Bug 488809: Loads missing after reopening workspace.
- Bug 495259: Orthotropic material scrips may compute wrong shear modulus
- Bug 497131: JS corrosion addition - Error message when meshing
- Bug 498225: GeniE 8.7-01 and 8.6-02 unable to interpret input curves in CoverCurves function
- Bug 498582: Brace not considered in the joint code check
- Bug 499131: Soil table mixes layers from different locations.
- Bug 499944: Unknow exception when importing xml
- Bug 500877: JS corrosion additions - Missing mesh properties to beams
- Bug 501053: Error message while mirroring global model
- Bug 505619: Error in import xml and crash saving dual assembly workspace
- Bug 505655: Error when using generalized cartesian system for point load
- Bug 507081: JS corrosion additions - wrong FEM net thickness and wrong Capacity manager net thickness
User stories
- User Story 449406: JS corrosion additions for buckling check
- User Story 90469: Saving user defined variables and functions to the GNX
- User Story 18445: SACS importer: Issue a warning and indicate which soil converted if the number of soils is greater than number of pile groups and all piles have the same diameter
- User Story 499998: “Custom FEM file” option description in the documentation
- User Story 486598: Add support for input of multiple curves to CreateCubicSplineFromPolyline
- User Story 491931: Inteprolate points and normal vectors using variable degree polynomials
- User Story 484172: For all structural concepts, it must be possible to edit its description from GUI
- Windows 10 64bit
- Windows 11 64bit
The following versions, or later, of Sesam applications should be used with this version of GeniE:
- Sestra 10.17-02
- Splice 8.0-01 (but it is required to use the upcoming Splice 8.1 for import of springs along piles)
- Submod 3.3-01
- Wajac 7.10-00
- Xtract 6.1-01
- Usfos 9.0-00
- Framework 4.4-00
- Stofat 4.1-02
- Sesam Converters 2.3-04
- Sesam Connector 1.0-03
- Sesam Core 2.0.0
- Nauticus Hull x86 - January 2018 - 18.15.97.1985
- Nauticus Hull 64bit – September 2023 - 20.29.2310.1204
- License Manager V11.19-02 (Flexnet V11.19 for license manager and dongle driver)
Highlighted features
Support for multiple soil conditions The user can now assign a specific location for each pile. Each pile in a model can therefore have different soil conditions that the other piles in the same model. The mesh of each pile is adjusted according to the soil sub-layers of the assigned location.
Soil linearisation along the pile When running a pile-soil analysis using Splice 8.1 or later, equivalent linear soil springs at each soil sub-layer are calculated and exported into a file. This file with the springs can be imported into GeniE and the piles can be replaced with beam elements to create a linearised foundation.
Earthquake analysis The user can now run an earthquake analysis from GeniE and execute code checks in GeniE based on combinations with earthquake analysis results. The license FRAMEWORK__EQRK is required in order to model earthquake data and execute the earthquake analysis in GeniE 8.8.
New features
- Feature 116483: Support automatic pile-soil linearisation along pile
- Feature 132946: Support earthquake analysis and code check in Genie
- Feature 248354: Support for multiple soil conditions
- Feature 248424: Export of compartments from NH to GeniE - Loads
- Feature 500883: Mesh options to replace piles with beam elements or to ignore piles in the mesh
- Technical Feature 153032: Make the new Domain Model Importer as default on SACS and FEM import
Bug fixes
- Bug 336670: Modelling grid not available in Create a set of stiffeners
- Bug 455988: Month in release notes is spelled in Norwegian
- Bug 460292: Point-Point Connections could not be listed in regular set after import SACS file
- Bug 460680: “No suitable constructors” when point mass included in get ConnectedConcepts
- Bug 461109: Unknown identifier when importing SACS file with Domain Model Import
- Bug 464952: Crash for splitting curve at point when selecting knot vector point
- Bug 465931: Some words appear in different color in the documentation
- Bug 467380: Crash in undo creating modelling grid through snap grid dialog
- Bug 469196: The color for fatigue hotspot could only change once and could not restore defaults
- Bug 472021: On-line Help System Error for misc. analysis types dialogs help shortcuts
- Bug 474833: GeniE model cannot export a set as xml file
- Bug 476018: GeniE Crash when right click on folder of a Load case on browser tree
- Bug 480126: Incomplete display for options in create slice dialog
- Bug 481993: Copy Run not clone selected code check run when multiple runs exist
- Bug 482327: Color code not shown and graphic got frozen after set to default palette
- Bug 482802: Longitudinal stiffener not able to be created on hullform
- Bug 482958: ACIS Error in unconnected move rotation
- Bug 483885: Heavy opening time for Jacket model
- Bug 484601: Can’t open model
- Bug 485174: GeniE doesn’t display the beam end properties correctly
- Bug 485753: Bad shaped elements created by Patch Surf mesher
- Bug 486804: Activate “Growth rate” option does not take effect without changing growth rate value
- Bug 486989: Not able to mesh in model in Sesam Manager
- Bug 488809: Loads missing after reopening workspace.
- Bug 495259: Orthotropic material scrips may compute wrong shear modulus
- Bug 497131: JS corrosion addition - Error message when meshing
- Bug 498225: GeniE 8.7-01 and 8.6-02 unable to interpret input curves in CoverCurves function
- Bug 498582: Brace not considered in the joint code check
- Bug 499131: Soil table mixes layers from different locations.
- Bug 499944: Unknow exception when importing xml
- Bug 500877: JS corrosion additions - Missing mesh properties to beams
- Bug 501053: Error message while mirroring global model
- Bug 505619: Error in import xml and crash saving dual assembly workspace
- Bug 505655: Error when using generalized cartesian system for point load
- Bug 507081: JS corrosion additions - wrong FEM net thickness and wrong Capacity manager net thickness
User stories
- User Story 449406: JS corrosion additions for buckling check
- User Story 90469: Saving user defined variables and functions to the GNX
- User Story 18445: SACS importer: Issue a warning and indicate which soil converted if the number of soils is greater than number of pile groups and all piles have the same diameter
- User Story 499998: “Custom FEM file” option description in the documentation
- User Story 486598: Add support for input of multiple curves to CreateCubicSplineFromPolyline
- User Story 491931: Inteprolate points and normal vectors using variable degree polynomials
- User Story 484172: For all structural concepts, it must be possible to edit its description from GUI
Compatibility:
- Versions of other Sesam applications that should be used with this version of GeniE.
- The database file format (GNX file) used for this version of GeniE is kept upwards compatible with subsequent GeniE versions.
- There is a new feature introduced in GeniE V8.2 called Dual Assembly, which is available as an option when creating a new workspace:
* With the Dual Assemby enabled, old JS files are normally not compatible for stiffened shell models.
* Old GNX and XML files can be imported into a database with Dual Assembly enabled.
* New GNX and XML files created with Dual Assembly can also be imported into a database with Dual Assembly disabled.
However, any Plate Seams (and Plate Segments) will then be lost, since they are only available with Dual Assembly.
- The workspace export (GNX file) from V7.2-07 and later may be imported into this version of GeniE.
DNV GeniE 8.8-08
The DNV GL Sesam software is a complete strength assessment system for engineering of ships, offshore structures and risers based on the finite element methodology.
Sesam GeniE is a tool for designing and analysing offshore and maritime structures made of beams and plates – integrating stability, loading, strength assessment and CAD exchange. It is part of the Sesam suite, covering the entire lifecycle of fixed and floating structures from design, structural re-analysis systems, modifications and repair, and input to the operational phase, emergency response and decommissioning. While Sesam has evolved as a market-driven modular system enabling users to invest in a package of selected modules, integrated packages have also been developed to cover specific needs. This allows for tailor-made Sesam installations to features in a cost-efficient way. All packages cover in-place, installation, transportation, accidental conditions and operational aspects. The Sesam suite of software provides seamless import of data between modules, allowing our users to easily integrate the use of solutions such as Sesam HydroD for hydrodynamic and hydrostatic analysis, Sesam DeepC for mooring and riser design, Sesam Marine for simulating, testing and evaluating marine operations, Sesam Pipeline for offshore pipelines and Sesam Wind for ultimate strength and fatigue analysis of offshore wind turbine substructures.
The World of Sesam
DNV GL is the world-leading provider of software for a safer, smarter and greener future in the energy, process and maritime industries. Our solutions support a variety of business critical activities including design and engineering, risk assessment, asset integrity and optimization, QHSE, and ship management. Nearly 50 years of developing quality software In providing your business with the best software solutions we are always striving to live up to our values.
Owner: DNV GL
Product Name: GeniE
Version: 8.8-08
Supported Architectures: x64
Website Home Page : www.dnv.com
Languages Supported: english
System Requirements: Windows *
Size: 491.8 mb
DNV GeniE 8.8-08
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![DNV GeniE 8.8-08]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
DNV GeniE 8.8-08
